4G 90V Wide Voltage Vehicle GPS Tracker Support RS232/RS485 Port Remotely Power Cut Off Anti Theft ACC Detect
Parameters:
Power supply mode: car's battery powered
Operating voltage range: DC 3.4V-4.5V
Working current: 4V/ average 35mA
Sleep current: 4V/less than 5mA
Built-in battery capacity: car's power supply
Communication frequency band: LTE/4G: FDD-LTE: B1/B3 TDD-LTE: B38/ B39/ B40/ B41 GSM/EDGE/2G: B3/B8
SIM card: Micro SIM card
Communication antenna: built-in antenna
Weight: 85g
Shell material: ABS plastic
IP protection level: IP66 waterproof
Standard accessories |
Main unit MT01-4G | Wiring |
12V/24V relay | Built in 500mAh battery |
Optional accessories |
Ultrasonic fuel sensor | Cuttable fuel sensor |
Fatigue camera | Ibutton reader&ibutton tag |
Speaker | Microphone |
Weight sensor | USB cable |
Humidity&temperature sensor | Crash sensor |
Specification
Physical | Dimension | 80*58*22mm |
Weight | 85g |
Cellular | Module | 4G CATM |
Frequency | LTE-FDD B1/B3/B5/B8 B1/B3/B5/B7/B8/B20/B28 LTE-TDD B34/B38/B39/B40/B41 B38/B40/B41 GSM B3/B8 B2/B3/B5/B8 |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
Power | Input voltage | 9-90V |
Battery | 500mAh/3.7V |
Power consumption | Average Current: <30mA (DC 12V) Maximum current: <10mA (DC 12V) |
Interface | Digital input(1) | SOS detect |
Digital input(4) | Ignition detect |
Digital output(1) | Relay |
GSM antenna | Internal High Gain |
GPS antenna | Internal High Gain |
SIM | Microsim |
Indicator | 2 status LEDs, Green: GSM, Red: GPS |
Memory | 2MB |
Environmental Parameter | Working Temperature | -40°C~75°C |
Humidity | 5% ~ 95% (no fog) |
1. Vehicle 4G GPS tracker + humidity&temperature monitor:
It can real time detect humidity and temperature value, also show it on the tracking platform.
2. Vehicle 4G GPS tracker + weight sensor:
Real time detect weight value
3. Vehicle 4G GPS tracker + speaker + microphone
Achieve two way communication
4. Vehicle 4G GPS tracker + ibutton reader
Advanced ibutton reader can achieve fully automatic anti-theft alarm and driver identify functions, a highly cost-effective tracking device for all kinds of vehicles, it can Arm/Disarm automatic by RFID tags or by SMS and Call, also have ACC is on/Movement alarms to protect vehicles from pilferage.
With ibutton reader, the device can Arm/Disarm automatically, compatible with original car remoter, don’t need to operate two remoters, it can protect vehicle in a easy and comfortable way, it is to say, even when the owner leaving the vehicle with door closed but forget to lock it, the system still can Arm automatically and protecting the vehicle from theft. What's more, it is very small in size, easy concealed and installed, an ideal tracker for vehicle tracking and car security.
Ibutton feature:
1. User is swipe the ibutton tag with ibutton reader, if an authorized tag can be detected, vehicle will enter disarm status. If an authorized tag can not be detected, it will send alert SMS “Engine Is On!” to authorized alert mobile phone number, and it will decide to cut off the oil/fuel supply according to its oil cut enable/disable status.
2. If illegal ignition be detected and oil/fuel supply cut off enabled, tracker will cut off the oil/fuel supply immediately, if user can swipe authorized ibutton tag at that moment, it will
restore oil/fuel supply.
3. If the oil/fuel supply is cut off by SMS or GPRS tracking platform, it can not be restored by disarm action.
4. After swipe authorized ibutton tag and ignite the vehicle, tracker will update tag number to GPRS tracking platform,this can achieve driver identify function, we can
know who drive which vehicle.

SOS alert